6. PAINTERS MATE ACRYLIC SEALANT

€4.00 Inc VAT

For sealing indoor joints with low absorption of movements.

- Colour: White
- Contents: 310 ml
- Container: Cartridge
- Chemical basis: Acrylic resin dispersion
- Density: 1.6 g/cm³
- Smell/fragrance: Faint odour
- Continuous motion absorption: 5 %
- Shore A hardness: 50

Min. breaking elongation: 250 %
Breaking elongation conditions: for 2-mm film
Full curing speed: 1 mm/d
Fully hardening/curing conditions: 23°C and 50% relative humidity
Min. skin-formation time: 10 min
Conditions for skin-formation time: at 23°C and 50% relative humidity
Fungicidal properties: No
Silicone-free: Yes
Min./max. temperature resistance: -20 to 80 °C
Min./max. processing temperature: 5 to 40 °C
Ultraviolet resistance: Yes
Coating compatibility: Yes
Recoatable/Can be painted over: Yes
Surface pre-treatment required: On absorbent or porous surfaces
Ratio of ingredients: Mixing ratio of acrylic sealant to water = 1:1 to 1:5
Shelf life from production/conditions: 18 Month / at 20°C

SKU: 0892165 Category: Sealants

Description
Additional information

Description

Can be coated/plastered over
Excellent adhesion of commercially available paints/plasters onto the sealant
Wide range of applications
Suitable for joints indoors subject to less stretching.
Silicone-free
Resistant to ageing, weathering and UV

NoticeDue to the wide variety of paint and lacquer formulas available, we recommend that you always carry out preliminary testing in order to rule out any interactions. Caution: Sealant joints that have been fully painted over tend to crack when movement occurs in the joint, as the applied paint is generally less elastic than the sealant.

The 600 ml bags are packed with 6 bag tips, art. no. 0891601001.

Tested in accordance with EN 15651 Part 1

Fire behaviour: Class E
Stability under load: ≤ 5%
Volume loss: ≤ 45%
Tensile behaviour after immersion in water (at 23°C), ductile: ≥ 25%
Durability: Passed

Building material class B2 in accordance with DIN 4102

Application areaFor indoor sealing and connection joints with low compression and expansion stresses, e.g. for sealing cracks in masonry, plaster or concrete.

Typical substrates with primer: Clinker, brick, wood, concrete, aerated concrete, gypsum, gypsum plasterboard, plaster, sand-lime brick.

Instructions

Please observe the “General Notes on Application for Sealants” and “Construction Material Compatibility of Würth Sealants” overview sheet.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.